Pure Water Window Cleaning

 Pure Water Window Cleaning


 IMG_5504 (1)

Pure Water Window and Solar Panel Cleaning

(video here)

Laboratory grade ultra pure water is the end product of a water treatment purification process called reverse osmosis. This involves mains water being forced under pressure through seven pre filters to remove all contaminants. This process produces water that has been stripped of all its dirty minerals that are commonly found in everyday mains water. This ultra pure water works by dissolving any dirt ions, as pure water has been stripped of all its contaminants it’s very effective at dissolving, absorbing and removing dirt and grime.

What System Do We Use?

Ionics Zero System

Crystal Clear have taken a no compromise approach in their investment in this new cleaning technology, we have chosen global industry leaders Ionics and their benchmark product The Zero System.

The Zero System

The Zero represents the ultimate in Pure Water Window Cleaning Systems. The most advanced Reach & Wash System ever, Ionics new Zero system produces ultra pure water at zero parts per billion (0ppb) and represents the gold standard. Water at 0ppb is one thousand times purer than water at zero parts per million (0ppm) which is industry standard for most window cleaners. Thermopure water at 0ppb produced by the Zero system will leave glass or other surfaces much cleaner than other systems, with far less chance of spotting on window glass. Pure water works by dissolving dirt ions, it follows that water at 0ppb is capable of dissolving much more dirt and grime than water at 0ppm.

Other systems remove only dissolved solids from the water supply, uniquely the Zero removes both dissolved solids and all organics as well as bacteria from the water supply. The results are not only water that is 1,000 times purer than industry standard pure water, but also ultra pure water that is free from micro-organisms such as legionella bacteria and the organic matter that bacteria feeds upon. A significant benefit is that bio-film cannot form upon the surface of filter media, RO membrane or inside of the tank itself. That means filters maintain day one performance which in turn means the ultra pure water produced by the Zero remains consistently pure throughout its production, and while inside the tank.

Hot or Cold Water?

We are able to produce on site heated pure water at any given temperature also known in the cleaning industry as Thermopure Water. Hot water has many natural advantages over cold water, hot water will cut through even the deepest ground in dirt with ease and will not freeze in the colder winter months.

What heights can you clean to?

Amazingly we are able to safely clean to an incredible height of 80ft without ever leaving the ground, this is the very highest possible height in the window cleaning industry.

Stages Of Water Treatment

The Zero is the only system in the world that has a unique seven stage filtration & treatment system.  As shown below:


Water Softening – Ion exchange resin used to switch out calcium and magnesium ions and replace them with sodium ions, which prevents calcium deposits forming on the membrane.

Activated Carbon – Carbon filters are most effective at removing chlorine, sediment, and volatile organic compounds (VOCs) from water.

Low Level Ozonation –Ozonation is a disinfection method that uses Ozone. Ozone is a gas with strong oxidizing properties capable of destroying a wide range of pathogens, including prions. Prevents bio-film and prolongs filter life.

Ultraviolet Germicidal Irradiation (UVGI) – UVGI is a disinfection method that uses Ultraviolet Light at sufficiently short wavelenght to kill micro organisms. In water treatment it is highly effective against water-bourne hazards such as Legionella bacteria.

5 Micron Filtration – 5 Micron filters remove solid particulates larger than 0.005mm in size. Ensures RO membrane performance.

Reverse Osmosis An advanced water treatment process where water is forced under pressure through a semi permeable membrane. Highly effective and economical, RO removes up to about 98% of the dissolved solids even in hard water areas.

De-Ionisation – Two types of special ion-exchanging resins are used to switch out any remaining ions for Hydrogen and Hydroxide ions to give H20. Usually these two resins types are mixed together in a   “mixed bed” DI filter. A highly effective water treatment used at the final stage in a water treatment system to produce Ultra Pure Water at zero parts per billion.


We are more than happy to offer anybody a free no obligation demonstration of our Zero System, to show just how much this incredible piece of modern engineering has transformed the cleaning industry.

By |2019-11-20T11:22:32+00:00|News|Comments Off on Pure Water Window Cleaning

About the Author: